Tsum1pfr-lf Datasheet «Secure – 2027»

A: Only if: (1) Pinout matches, (2) AMS1117’s dropout voltage (~1.1V) is acceptable. The Tsum1pfr-lf likely has LDO dropout (~0.2V). Replace with a modern LDO like AP7365 or NCP1117 for similar performance.

| Pin No. | Symbol | Function Description | |---------|--------|----------------------| | 1 | VIN | Input voltage supply. Bypass with 1µF ceramic capacitor to GND. | | 2 | GND | Ground connection. Connected to thermal pad if present. | | 3 | EN | Enable pin. Active high (logic >1.2V). Tie to VIN if unused. | | 4 | NC / BYP | No connect or bypass capacitor pin for noise reduction. | | 5 | VOUT | Regulated output voltage. Output capacitor (1µF to 10µF) required. | Tsum1pfr-lf Datasheet

Please note: Based on standard electronic component nomenclature, "Tsum1pfr-lf" does not match a widely published, generic component from major vendors (like Texas Instruments, ON Semi, or Diodes Inc.) as of my last knowledge update. It strongly appears to be a proprietary, custom, or internal part number—potentially from a specific OEM (e.g., a TV power supply, laptop board, or industrial controller). The "LF" suffix typically denotes "Lead-Free" or "Halogen-Free." A: Only if: (1) Pinout matches, (2) AMS1117’s

End of Article