| Specification | Detail | |---------------|---------| | (per channel, 1kHz, 6 ohms) | 120 Watts per channel (120W + 120W) | | Total Dynamic Power | Approx. 330 Watts (Peak) | | Frequency Response | 20 Hz – 20,000 Hz (±0.5 dB) | | Total Harmonic Distortion (THD) | Less than 0.09% (at rated power) | | Damping Factor | 50 (at 1kHz, 8 ohms) | | Signal-to-Noise Ratio (S/N) | 95 dB (CD input) |
| Specification | Detail | |---------------|---------| | | 87.5 – 108 MHz | | Tuning Range (AM/MW) | 530 – 1,710 kHz | | FM Usable Sensitivity | 11.2 dBf (IEC) | | FM S/N Ratio (Stereo) | 65 dB | | FM Stereo Separation | 35 dB (at 1kHz) | | Preset Memory | 30 stations (15 FM + 15 AM) |
| Specification | Detail | |---------------|---------| | | 3-Way, Bass Reflex (Rear ported) | | Woofer | 6.5 inches (16 cm) – Polypropylene cone | | Midrange | 2 inches (5 cm) – Paper cone | | Tweeter | 0.75 inches (1.9 cm) – Piezoelectric / Film type | | Nominal Impedance | 6 ohms (This is critical – do not use with 8 ohm only amps) | | Sensitivity (SPL) | 88 dB (1W/1m) | | Power Handling Capacity | 200 Watts (Peak) / 120 Watts (RMS) | | Frequency Range | 35 Hz – 20,000 Hz | | Crossover Frequency | 3,000 Hz (approx) | | Dimensions (H x W x D) | 13.75 x 10.5 x 12.25 inches (approx) | sony lbtv702 specs
The 6.5-inch polypropylene woofer provided a surprising amount of low-end extension (35Hz) which is rare for a mini system. The 6-ohm impedance allowed the amp to draw more current than 8-ohm speakers, generating more perceived volume. 7. Physical Dimensions & Weight If you’re buying a vintage LBT-V702, measure your space. This is not a compact unit.
| Specification | Detail | |---------------|---------| | | CD, CD-R, CD-RW (CD-RW playback was limited on early models) | | Number of Discs | 5 (Carousel magazine) | | Frequency Response | 2 Hz – 20,000 Hz (±0.5 dB) | | Dynamic Range | 96 dB | | Signal-to-Noise Ratio | 103 dB | | Total Harmonic Distortion | 0.003% (at 1kHz) | | D/A Converter | 1-bit Dual DAC | | Pickup Mechanism | 3-beam laser | | Playback Modes | Program (32 tracks), Shuffle, Repeat (1/All), Intro Scan | | Specification | Detail | |---------------|---------| | |
| Specification | Detail | |---------------|---------| | | Auto-reverse on both Deck A & Deck B | | Tape Type | Normal (Type I), Chrome (Type II), Metal (Type IV) – Playback only for Metal on some units | | Noise Reduction | Dolby B (Deck B only) | | Dubbing Speed | Normal (1:1) & High-Speed (approximately 2:1) | | Frequency Response (Deck B, Metal tape) | 30 Hz – 15,000 Hz (±3 dB) | | Wow & Flutter | 0.15% (WRMS) | | Signal-to-Noise Ratio (Dolby off) | 55 dB (Dolby B on: +8 dB) |
| Component | Dimensions (W x H x D) | Weight | |------------|----------------------|--------| | | 17" x 6.3" x 13.8" (430 x 160 x 350 mm) | 13.2 lbs (6 kg) | | Cassette Deck | 17" x 5.9" x 11.8" (430 x 150 x 300 mm) | 7.7 lbs (3.5 kg) | | CD Changer | 17" x 5.9" x 14.2" (430 x 150 x 360 mm) | 9.9 lbs (4.5 kg) | | Each Speaker | 13.8" x 11.0" x 12.6" (350 x 280 x 320 mm) | 11 lbs (5 kg) | | Total System Weight | N/A | Approx. 53 lbs (24 kg) | Chrome (Type II)
The LBT-V702 isn't just a stereo. It's a statement from an era when Sony truly dominated the consumer audio world.