Quectel Ec25 Change Imei May 2026

AT+QPRTPARA=3 Or

Then recheck:

AT+EGMR=1,29,"350123456789012" One of these will work depending on your EC25 firmware revision (check with AT+CGMR ). After writing, you must reset the module for the IMEI to take effect in the radio firmware. quectel ec25 change imei

AT The module should reply:

If you need to change IMEIs regularly for legitimate testing, consider using a hardware IMEI switcher board or a software-defined cellular stack like srsLTE, rather than tampering with production-grade modules. | Action | AT Command | |--------|-------------| | Check IMEI | AT+CGSN=1 | | Write new IMEI (standard) | AT+EGMR=1,7,"350123456789012" | | Write IMEI (alternate) | AT+EGMR=1,10,"350123456789012" | | Soft reboot module | AT+CFUN=1,1 | | Unlock IMEI zone | AT+QPRTPARA=1 | | Factory reset (doesn’t clear IMEI) | AT&F | Final word: Always keep a backup of your original IMEI. If you are a genuine developer working with Quectel EC25 modules, reach out to Quectel’s FAE team for the official IMEI rewriting tool—it’s safer and legally compliant. | Action | AT Command | |--------|-------------| |

OK Try:

If you lost it and need a full factory reset (including erasing all NV changes), you would need Quectel’s proprietary QFirehose tool and a full flash dump—generally not available to end users. The Quectel EC25 allows IMEI modification via AT+EGMR=1,7,"your_15_digit_imei" in 95% of development modules . For carrier-locked or production-locked units, it is either impossible or requires privileged authorization. AT+QPRTPARA=3 Or Then recheck: AT+EGMR=1

for AT+EGMR.