Petzl Myo Xp Repair 2021 -

By Gear Repair Expert | Updated for 2021

By following this 2021 repair guide, you’ve not only saved money (a comparable new Petzl NAO costs $300+) but also kept a perfectly functional tool out of a landfill. The flicker is gone. The boost mode hits hard. And when you turn it on at the cave mouth or the trailhead, it shines with a second life. petzl myo xp repair 2021

Cree XP-G2 on 10mm star board (3V, 350-700mA). This will give you ~200 lumens on Boost mode without changing drivers. By Gear Repair Expert | Updated for 2021

| Part | 2021 Source | Estimated Cost | |------|-------------|----------------| | Silicone wire | Amazon / Adafruit | $5 for 10ft | | Cree XP-G2 LED | Mouser / Digi-Key / LEDSupply | $6-$8 | | 10mm star board | Mountain Electronics | $2 | | Rotary switch (Bourns) | Mouser #652-PEC11R-4215F | $3.50 | | Hinge STL file | Thingiverse #4321515 | Free | | Battery springs | McMaster-Carr (part 9654K35) | $4 for 5 | And when you turn it on at the

Drop a comment below. And if you found this guide useful, share it with the climbing or caving forum of your choice – our old gear deserves it. Article last updated: July 2021. Covers all known repair procedures for the Petzl Myo XP and Myo XP Belt.

It is a familiar, frustrating moment for any dedicated caver, climber, or night trail runner. You reach for your trusty —a workhorse that has lit thousands of vertical meters and deep cave passages—flick the switch, and nothing happens. Or worse, it flickers pathetically before succumbing to darkness.