Eberle Instat 6 User Manual English Link

To reset all settings to factory defaults (schedule, parameters, time) – Press and hold Clock + Auto/Manual for 10 seconds until all segments flash, then release. 10. Maintenance and Battery Replacement Even though the Instat 6 is mains powered, it contains a lithium coin cell (CR2032) to retain the clock during short power outages. Replace every 2-3 years.

Use Up/Down to select PXX, press Clock, adjust value with Up/Down, press Clock to save. Exit by holding Auto/Manual for 3 seconds. 8. Wiring Diagram and Terminal Assignments Danger: 230V AC present. Only for qualified installers. eberle instat 6 user manual english

Remember: If you encounter persistent error codes or heating that won't turn on/off despite following this manual, consult a qualified HVAC technician. The Eberle Instat 6 is reliable, but system integration issues can sometimes arise. This article is for informational purposes only. Always refer to the original manufacturer’s documentation for safety-critical steps. To reset all settings to factory defaults (schedule,